YZC12型振动压路机为重型串联式振动压路机，主要适用于高等级公路，机场，停车场及工业性场院等工程施工中的沥青混凝土，水泥混凝土面层的压实作业，也适用于大型基础，次基础及路堤填方的压实。
YZC12型振动压路机采用全液压传动和全电液控制，主要元件和系统全部国际化配套，具有全轮无级变速驱动，双频双振幅振动，全铰接转向等结构及性能特点。
Working mass (Kg) |
12000 |
Distribution mass on front drum (Kg) |
6000 |
Distribution mass on rear drum (Kg) |
6000 |
Static linear load (N/cm) of front tyre |
276 |
Static linear load (N/cm) of rear tyre |
276 |
Driving speed(Km/h) |
0 － 10 |
Theoretical gradeability (%) |
30 |
Min. outer turning radius(mm) |
6000 |
Min.clearance(mm) |
340 |
Steering angle |
±40° |
Swinging angle |
±12° |
Vibratory frequency(low / high )(Hz) |
45/48 |
Nominal amplitude (low / high Amp) (mm) |
0.8/0.4 |
Centrifugal force @ high /low Amp (kN) |
140/80 |
Vibrating drum dia(mm) |
1250 |
Vibrating drum width (mm) |
2130 |
Engine |
|
Model |
Cummins B3.9-C |
Type |
水冷 Water-cooling |
Rated putout |
97 |
Total length(mm) |
5330 |
Total width(mm) |
2300 |
Total height (mm) |
3170 |
Fuel tank capacity |
260 |
Water tank capacity |
2*500 |
